PROFESSIONAL FIRE CONTAINMENT +49 (0)6151 7877 805
Loeschdecken.deRequest advice

Welding blankets and spark protection blankets up to 1300 °C

Welding blankets and spark protection blankets up to 1300 °C

Welding blankets protect floors, machines, vehicles and components from weld spatter, flying sparks and radiant heat. They are laid out, draped over equipment or hung as screens wherever welding, grinding or flame cutting takes place. We supply 12 versions, from light spark protection blankets up to 550 °C to silica fibre and carbon felt blankets for 1000 to 1300 °C – made up, on the roll or to size.

Request a welding blanket

Which welding blanket for which job?

The overview below shows which version is typically chosen for which kind of work. It is based on the manufacturer’s data sheets; if in doubt, we are happy to advise you.

Typical use Suitable version Why
Flame cutting, gouging, large weld spatter and glowing parts on floors or steel surfaces DD-CPR-56.50.9x
lighter: DD-CPR-56.51.9x
Silicate fabric with the highest continuous temperature (1000 °C, briefly 1300 °C), Euroclass A1. The lighter version is more flexible, e.g. for covering components.
Horizontal welding with lots of spatter; the blanket is often folded or pulled over sharp-edged parts (assembly, steel construction, building sites) DD-CPR-56.50.7x The PU coating prevents holes from folding, sharp edges and weld spatter; high continuous heat resistance up to 750 °C.
Horizontal hot work where a non-combustible material (A1) is required, e.g. in buildings and plants DD-CPR-56.53.2x Special high-temperature coating, A1, flame protection briefly up to approx. 1000 °C; mainly for horizontal use.
Heavy work where the same blanket is used lying flat and hanging DD-CPR-56.53.8x Graphite-coated textured fabric for horizontal and vertical use, up to 700 °C.
Everyday workshop use: welding and grinding, as a blanket or a curtain; cutting from the roll DD-CPR-56.50.4x All-rounder up to 700 °C, A1, inorganic dust-bound coating; for horizontal and vertical use.
Medium welding work on workbenches or floors with mechanical stress DD-CPR-56.55.1x Heavy textured fabric (1100 g/m²) with PU coating on both sides, mechanically robust; up to 550 °C, briefly 900 °C.
Grinding and welding curtains, screening machines and passages; light welding work DD-CPR-56.50.1x Filament fabric for vertical use up to 550 °C; lying flat only at lower heat.
Vehicles, car bodies, tight spaces, gaps and corners; mechanical engineering DD-CPR-56.57 Carbon felt: light, very flexible, does not scratch; briefly up to 1300 °C, as an insulating blanket below 200 °C. For doors and magnetic fixing see the vehicle special products.
Shielding against radiant heat, e.g. in front of furnaces, burners or hot components DD-CPR-56.51.01 Aluminium coating reflects radiant heat up to approx. 1000 °C; contact heat only up to 200 °C – not for laying glowing parts on.
Environments with oil, chemicals, weather or UV; where electrical insulation is needed DD-CPR-56.52.06 Silicone rubber on both sides: oil and dirt repellent, largely acid and alkali resistant, weather and UV resistant, good electrical insulation.
Workshops and plants contaminated with oil and grease, for hanging DD-CPR-56.59.14 Acrylic coating on both sides: resistant to oil, grease and acids.

Rule of thumb: for horizontal use and heavy work choose heavy textured fabrics or silicate; for curtains, lighter filament fabrics. Use blankets in several layers and preferably at an angle of at least 15°.

Overview: all welding blankets

Version Dealer no. Material / Coating max. °C (continuous / short-term) Fire class EN 13501-1 Sizes
Welding blanket for heavy welding DD-CPR-56.50.9x Silica fibre (filament), 1220 g/m²
mineral finish
1000 / 1300 A1, non-combustible 100 × 90 to 600 × 360 cm, roll 90 cm × 50 m, custom
Welding blanket for heavy welding DD-CPR-56.51.9x Silica fibre (filament), 600 g/m²
mineral finish
1000 / 1300 A1, non-combustible 100 × 90 to 600 × 360 cm, roll 90 cm × 50 m, custom
Welding blanket for heavy welding DD-CPR-56.50.7x Glass fibre fabric, textured, 1220 g/m²
PU + high-temp. both sides
750 / 900 A2-s1,d0, non-combustible 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
Welding blanket for heavy welding DD-CPR-56.53.2x Glass fibre fabric, textured, 1035 g/m²
vermiculite both sides
700 / 1000 A1, non-combustible 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
Welding blanket for heavy welding DD-CPR-56.53.8x Glass fibre fabric, textured, 1100 g/m²
graphite both sides
700 / 900 A2-s1,d0, non-combustible 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
Welding blanket for welding and grinding DD-CPR-56.50.4x Glass fibre fabric, filament, 700 g/m²
calcium silicate both sides
700 / 750 A1, non-combustible 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
Welding blanket for welding and grinding DD-CPR-56.55.1x Glass fibre fabric, textured, 1100 g/m²
PU both sides
550 / 900 A2-s1,d0, non-combustible 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m
Welding blanket for light work DD-CPR-56.50.1x Glass fibre fabric, filament, 720 g/m²
PU both sides
550 / 600 A2-s1,d0, non-combustible 100 × 100 to 600 × 400 cm, rolls 100 cm × 25 m and 150 cm × 50 m, custom
Carbon felt welding blanket DD-CPR-56.57 Carbon felt, 420 g/m²
uncoated
1300 – 200 × 100 to 300 × 200 cm, rolls 200 cm × 10 m and 200 cm × 50 m
Heat shield blanket with aluminium facing DD-CPR-56.51.01 Glass fibre fabric, textured, 1050 g/m²
aluminium foil one side
550 A2-s1,d0, non-combustible Roll goods, 100 cm wide, roll length 50 m
Welding blanket, oil, grease and acid resistant DD-CPR-56.52.06 Glass fibre fabric, filament, 590 g/m²
silicone rubber both sides
550 / 600 – Roll goods, 100 cm wide, roll length 25 m
Welding blanket, oil, grease and acid resistant DD-CPR-56.59.14 Glass fibre fabric, filament, 550 g/m²
acrylic both sides
550 / 600 – Roll goods, 100 cm wide, roll length 50 m

High-temperature welding blankets (700–1000 °C)

Welding blanket for heavy welding 1000 °C

Welding blanket for heavy welding – 1000 °C, 1220 g/m² (DD-CPR-56.50.9x)

  • Continuous temperature up to 1000 °C, briefly approx. 1300 °C
  • Silica fibre (filament), Weight 1220 g/m²
  • mineral finish
  • EN 13501-1: A1 – non-combustible
  • Use: horizontal + vertical
  • 100 × 90 to 600 × 360 cm, roll 90 cm × 50 m, custom
  • Per data sheet: Silicate fabric made of harmless silica fibres with a mineral finish for better abrasion and cut resistance; excellent handling, usable as a welding blanket even under extreme conditions.

Request this version →

Welding blanket for heavy welding 1000 °C

Welding blanket for heavy welding – 1000 °C, 600 g/m² (DD-CPR-56.51.9x)

  • Continuous temperature up to 1000 °C, briefly approx. 1300 °C
  • Silica fibre (filament), Weight 600 g/m²
  • mineral finish
  • EN 13501-1: A1 – non-combustible
  • Use: horizontal + vertical
  • 100 × 90 to 600 × 360 cm, roll 90 cm × 50 m, custom
  • Per data sheet: Lighter silicate fabric made of harmless silica fibres with a mineral finish for better abrasion and cut resistance; good handling, usable as a welding blanket even under extreme conditions.

Request this version →

Welding blanket for heavy welding 750 °C

Welding blanket for heavy welding – 750 °C, 1220 g/m² (DD-CPR-56.50.7x)

  • Continuous temperature up to 750 °C, briefly approx. 900 °C
  • Glass fibre fabric, textured, Weight 1220 g/m²
  • PU + high-temp. both sides
  • EN 13501-1: A2-s1,d0 – non-combustible
  • Use: horizontal + vertical
  • 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
  • Per data sheet: Glass fabric with a grey, flame-retardant PU coating on both sides (slip and cut resistance) plus an inorganic finish; high continuous heat resistance and mechanical strength, especially for horizontal use. The coating prevents holes from frequent folding, sharp edges and weld spatter.

Request this version →

Welding blanket for heavy welding 700 °C

Welding blanket for heavy welding – 700 °C, 1035 g/m² (DD-CPR-56.53.2x)

  • Continuous temperature up to 700 °C, briefly approx. 1000 °C
  • Glass fibre fabric, textured, Weight 1035 g/m²
  • vermiculite both sides
  • EN 13501-1: A1 – non-combustible
  • Use: horizontal + vertical
  • 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
  • Per data sheet: Glass fabric with a special high-temperature coating for better slip and cut resistance; toxicologically harmless, asbestos-free and mechanically robust; especially for horizontal use.

Request this version →

Welding blanket for heavy welding 700 °C

Welding blanket for heavy welding – 700 °C, 1100 g/m² (DD-CPR-56.53.8x)

  • Continuous temperature up to 700 °C, briefly approx. 900 °C
  • Glass fibre fabric, textured, Weight 1100 g/m²
  • graphite both sides
  • EN 13501-1: A2-s1,d0 – non-combustible
  • Use: horizontal + vertical
  • 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
  • Per data sheet: Textured glass fabric, graphite-coated on both sides; for horizontal and vertical use.

Request this version →

Welding blankets for everyday workshop use (550–700 °C)

Welding blanket for welding and grinding 700 °C

Welding blanket for welding and grinding – 700 °C, 700 g/m² (DD-CPR-56.50.4x)

  • Continuous temperature up to 700 °C, briefly approx. 750 °C
  • Glass fibre fabric, filament, Weight 700 g/m²
  • calcium silicate both sides
  • EN 13501-1: A1 – non-combustible
  • Use: vertical (hanging)
  • 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m, custom
  • Per data sheet: Glass filament fabric with a grey, flame-retardant, inorganic coating on both sides (dust-bound) for better slip resistance; vertical as a grinding and welding curtain or horizontal as a blanket at higher temperatures.

Request this version →

Welding blanket for welding and grinding 550 °C

Welding blanket for welding and grinding – 550 °C, 1100 g/m² (DD-CPR-56.55.1x)

  • Continuous temperature up to 550 °C, briefly approx. 900 °C
  • Glass fibre fabric, textured, Weight 1100 g/m²
  • PU both sides
  • EN 13501-1: A2-s1,d0 – non-combustible
  • Use: horizontal + vertical
  • 100 × 100 to 600 × 400 cm, roll 100 cm × 25 m
  • Per data sheet: Textured glass fabric with a silver-grey, flame-retardant PU coating with aluminium pigments on both sides; toxicologically harmless, asbestos-free and mechanically robust.

Request this version →

Welding blanket for light work 550 °C

Welding blanket for light work – 550 °C, 720 g/m² (DD-CPR-56.50.1x)

  • Continuous temperature up to 550 °C, briefly approx. 600 °C
  • Glass fibre fabric, filament, Weight 720 g/m²
  • PU both sides
  • EN 13501-1: A2-s1,d0 – non-combustible
  • Use: vertical (hanging)
  • 100 × 100 to 600 × 400 cm, rolls 100 cm × 25 m and 150 cm × 50 m, custom
  • Per data sheet: Glass filament fabric with a silver-grey, flame-retardant PU coating with aluminium pigments on both sides; vertical as a grinding and welding curtain, also at high temperatures, or as a welding blanket at lower heat.

Request this version →

Special blankets

Carbon felt welding blanket 1300 °C

Carbon felt welding blanket – 1300 °C, 420 g/m² (DD-CPR-56.57)

  • Continuous temperature up to 1300 °C
  • Carbon felt, Weight 420 g/m²
  • uncoated
  • Use: flexible covering
  • 200 × 100 to 300 × 200 cm, rolls 200 cm × 10 m and 200 cm × 50 m
  • Very flexible and scratch-free – ideal for covering vehicles. Not suitable as a cooling blanket.
  • Per data sheet: Carbon felt, 5 mm thick, very flexible – also for tight spaces, gaps and corners; does not itch, free of asbestos and ceramic fibres; suitable as an insulating blanket below 200 °C. Used e.g. in mechanical engineering, flame cutting, shipbuilding and automotive plants.

Request this version →

Heat shield blanket with aluminium facing 550 °C

Heat shield blanket with aluminium facing – 550 °C, 1050 g/m² (DD-CPR-56.51.01)

  • Continuous temperature up to 550 °C
  • Glass fibre fabric, textured, Weight 1050 g/m²
  • aluminium foil one side
  • EN 13501-1: A2-s1,d0 – non-combustible
  • Use: horizontal + vertical
  • Roll goods, 100 cm wide, roll length 50 m
  • Reflects radiant heat up to 1000 °C, contact heat up to 200 °C.
  • Per data sheet: Glass filament fabric with an aluminium coating on one side, especially for protection against radiant heat: material approx. 550 °C, continuous radiation approx. 1000 °C, contact heat 200 °C.

Request this version →

Welding blanket, oil, grease and acid resistant 550 °C

Welding blanket, oil, grease and acid resistant – 550 °C, 590 g/m² (DD-CPR-56.52.06)

  • Continuous temperature up to 550 °C, briefly approx. 600 °C
  • Glass fibre fabric, filament, Weight 590 g/m²
  • silicone rubber both sides
  • Use: vertical (hanging)
  • Roll goods, 100 cm wide, roll length 25 m
  • Oil, grease and acid resistant – for workshops and plants with contaminated surfaces.
  • Per data sheet: Glass fabric coated with silicone rubber on both sides; highly resistant to mechanical, thermal and electrical stress; light, UV, oxidation and weather resistant, largely acid and alkali resistant, dirt and oil repellent, good electrical insulation.

Request this version →

Welding blanket, oil, grease and acid resistant 550 °C

Welding blanket, oil, grease and acid resistant – 550 °C, 550 g/m² (DD-CPR-56.59.14)

  • Continuous temperature up to 550 °C, briefly approx. 600 °C
  • Glass fibre fabric, filament, Weight 550 g/m²
  • acrylic both sides
  • Use: vertical (hanging)
  • Roll goods, 100 cm wide, roll length 50 m
  • Oil, grease and acid resistant – for workshops and plants with contaminated surfaces.
  • Per data sheet: Glass filament fabric with an acrylic coating on both sides; resistant to oil, grease and acids.

Request this version →

Special products for vehicle repair

Door cover and magnetic protection blanket for cars and trucks

How to choose the right welding blanket

  • Temperature: 550 °C is enough for light welding and grinding. For heavy welding, flame cutting and large spatter, 700 to 1000 °C makes sense.
  • Lying or hanging: Light filament blankets are designed for vertical hanging. Heavy textured fabrics and silica fibre also cope with spark showers and hot parts on horizontal surfaces.
  • Fire behaviour: For demanding areas choose blankets classified A1 or A2-s1,d0 to EN 13501-1.
  • Environment: For vehicles, soft scratch-free carbon felt is recommended; for oil, grease or acids a silicone or acrylic coating; for radiant heat an aluminium facing.

Welding blankets are protective covers for hot work. They do not replace a fire blanket for vehicle or battery fires – see our EV fire blankets for that.

Notes on use (per manufacturer data sheet)

  • For optimum protection use welding blankets in several layers – always in several layers on first use.
  • Preferably use welding blankets at an angle of at least 15°.
  • Temperature data are guide values: always test the blanket or heat-protection fabric for suitability in advance.
  • Thicker blankets of the same material provide more protection and insulation at the same temperature.
  • Check welding blankets regularly for cracks and other defects and replace damaged blankets.
  • Because applications vary widely, the manufacturer gives no guarantee on use; the user decides whether the blanket provides sufficient protection in the specific case.
  • The cut edges are finished with high-quality Kevlar thread.
  • Special sizes are available on request.
  • Temperature data and fire class (EN 13501-1) describe material properties according to the manufacturer – they are no guarantee against penetration by weld spatter, molten metal or direct flame. Suitability depends on the process, amount of spatter, exposure time and position.
  • For contact with oil, grease or acids, check resistance to the specific medium in advance.
  • Welding blankets are a supplementary protective measure: remove combustible materials from the danger zone where possible, seal openings against flying sparks and, depending on the risk assessment, provide a hot-work permit, fire extinguishers, a fire guard and a fire watch afterwards.

FAQ

What is the difference between a welding blanket and a fire blanket?

A welding blanket protects against sparks and heat during welding and grinding. A fire blanket smothers a fire that has already started. Large vehicle fire blankets are needed for EV fires.

Can I order welding blankets to size?

Yes. Most versions are available in standard sizes, on the roll and to size, with eyelets, hook-and-loop or magnets on request. Rolls are available, for example, in 100 cm × 25 m, 150 cm × 50 m, 200 cm × 10 m and 200 cm × 50 m.

How do I get a price?

Send us the dealer number, size and quantity via the enquiry form. Invoice payment is available for companies and public buyers.

Request a welding blanket

Request a welding blanket

Tell us the dealer number, size, quantity and application – you will receive a quote including delivery time.

    Fields marked * are required.









    Your details are used to process your enquiry. More information in our privacy policy.